The C-TOP B control unit can adapt to any INOXPA actuator and both efficiently and individually automate pneumatically driven process valves.
These include butterfly, ball or single or double seat valves with single-acting actuator.
C-TOP B Контрольний Пристрій
C-TOP B Контрольний Пристрій
Запросить инфо
C-TOP B Контрольний Пристрій
Запросить инфо
C-TOP B Контрольний Пристрій
Принцип работы
The control head works with or without a solenoid valve. It contains two magnetic targets fixed to the adapter shaft and an electronic module formed by three sensors connected to the three visual indicators (LEDs).
Through external signals, the solenoid valve which controls and acts on the valve is activated.
At the same time, the electronic module sensors can read the position of the valve actuator through the detection of the position of the targets located on the adapter shaft and they inform of the valve state with the illuminate of the control head.
The control head includes DIP switches that allow obtaining different configurations of the output signals to adapt the control head to the different types of valves.
Конструкция и характеристики
The C-TOP B installs easily onto the top of the valve’s actuator.
Quick and simple configuration.
Line detection using magnetic Reed type sensors.
360º vies of lights indicating valve status.
Материалы
Plastic parts PA6
Nuts and bolts A2
Gaskets NBR
Pneumatical connections nickel-plated brass
Документ
Тех.опис (4)
Краткое руководство по монтажу (2)
Інструкції (4)
Принцип работы
The control head works with or without a solenoid valve. It contains two magnetic targets fixed to the adapter shaft and an electronic module formed by three sensors connected to the three visual indicators (LEDs).
Through external signals, the solenoid valve which controls and acts on the valve is activated.
At the same time, the electronic module sensors can read the position of the valve actuator through the detection of the position of the targets located on the adapter shaft and they inform of the valve state with the illuminate of the control head.
The control head includes DIP switches that allow obtaining different configurations of the output signals to adapt the control head to the different types of valves.
Материалы and Опции
Plastic parts PA6
Nuts and bolts A2
Gaskets NBR
Pneumatical connections nickel-plated brass
Документ
| Документ № | 10.427.33.02ES |
| Заглавие | C-TOP B Cabezal de Control |
| Формат файла | |
|
|
| Документ № | 10.427.33.02EN |
| Заглавие | C-TOP B Control Unit |
| Формат файла | |
|
|
| Документ № | 10.427.33.02FR |
| Заглавие | C-TOP B Tête de commande |
| Формат файла | |
|
|
| Документ № | 10.427.33.02RU |
| Заглавие | C-TOP B Контрольное устройство |
| Формат файла | |
|
|
| Документ № | 10.427.30.09MU |
| Заглавие | VALID GUIDE SINCE JANUARY 2024 - Quick installation guide / Guía rápida de instalación / Guide d’installation rapide / Краткое руководство по монтажу C-TOP B |
| Формат файла | |
|
|
| Документ № | 10.427.30.05MU |
| Заглавие | VALID GUIDE UNTIL JANUARY 2024 (PCB R - 8V9C0-3311000000) - Quick installation guide / Guía rápida de instalación / Guide d’installation rapide / Краткое руководство по монтажу C-TOP B |
| Формат файла | |
|
|
| Документ № | 10.427.30.06ES |
| Заглавие | INSTRUCCIONES DE INSTALACIÓN, SERVICIO Y MANTENIMIENTO - CABEZAL DE CONTROL C-TOP B |
| Формат файла | |
|
|
| Документ № | 10.427.30.06EN |
| Заглавие | INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS - CONTROL HEAD C-TOP B |
| Формат файла | |
|
|
| Документ № | 10.427.30.06FR |
| Заглавие | INSTRUCTIONS RELATIVES À L’INSTALLATION, À LA MISE EN SERVICE ET À LA MAINTENANCE - TÊTE DE COMMANDE C-TOP B |
| Формат файла | |
|
|
| Документ № | 10.427.30.06RU |
| Заглавие | ИНСТРУКЦИИ ПО УСТАНОВКЕ, ЭКСПЛУАТАЦИИ И ОБСЛУЖИВАНИЮ - КОНТРОЛЬНОЕ УСТРОЙСТВО C-TOP B |
| Формат файла | |
|
|
Сопутствующее оборудование
